High Performance Urethane (Semi-Gloss) - 1320
Product # :
Semi-gloss sealant with superior chemical and wear resistance. This High Performance Urethane is recommended for use as a topcoat for either a thin-mil or high build system.
- Chemical and abrasion resistant, with superior flexibility.
- UV Stable.
- Semi- gloss, aliphatic polyurethane.
- Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas.
- Two component polyester/aliphatic polyurethane.
- Primer is required. Please use CM1015 (Water Based Epoxy Coating) or CM1144 (High Performance Epoxy Floor Coating).
|Application||Mid Coat, Primer, Top Coat|
|VOC Compliant||Less Than 450 Grams per Liter|
|Light Foot Traffic||14-24 Hours|
|Primer||Required (Use CM1015 or CM1144)|
|Pot Life at 70 Degrees||3-5 Hours|
|Recoat Time at 70 Degrees||4-8 Hours|
|Full Cure (Heavy Traffic)||3-5 Days|
|Approximate Coverage||320-500 Sq Ft @ 5-6 Mil Wet|
You may also like
Have a representative contact me to Book a Demo
A QuestMark representative will contact you shortly to get your demo scheduled