High Build Epoxy Coating - 3707
Product # :
CM3707
Recommended as a high build topcoat or basecoat on concrete or masonry where floors are too rough for thin mil coatings. QuestMark's high build epoxy floor coatings are colorfast, impact and chemical resistant.
Brand :
QuestMark
In stock
Details
- High build, colorfast, chemical and impact resistant.
- Recommended for floors that are too rough for thin mil coatings.
- Recommended as a high build topcoat or basecoat on concrete or masonry.
- Two component 100% solids epoxy.
- Primer is required. Please use CM1015 (Water Based Epoxy Coating) or CM1144 (High Performance Epoxy Floor Coating).
More Information
| Application | Top Coat |
|---|---|
| VOC Compliant | Less Than 50 Grams per Liter |
| Light Foot Traffic | 12-14 Hours |
| Primer | Required (Use CM1015 or CM1144) |
| Pot Life at 70 Degrees | 30-50 Minutes |
| Recoat Time at 70 Degrees | 8-12 Hours |
| Full Cure (Heavy Traffic) | 2-7 Days |
| Approximate Coverage | 53-130 Sq Ft per Gallon @ 12-30 Mil |
Technical Specifications
Details
More Information
Technical Specifications
You may also like
Have a representative contact me to Book a Demo
Thank You
General Information
A QuestMark representative will contact you shortly to get your demo scheduled