Water-based Epoxy Skidproofer 5016
A two component, aggregate-filled, water-based epoxy skidproofer. Recommended for skidproofing concrete in locker rooms, employee entrances
or areas where slips could occur.
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Tile Red,
Brown, Tan, Beige, Light Blue, Blue, and special colors available upon request.
Packaging: 3 gal. kit (available in a medium or course non-slip texture)
Pot Life: 1-1.5 hrs. @ 70 degrees F
Recoat
Time: 7 –10 hrs. @ 70 degrees F
Cure
Time (Light Foot Traffic): 16-24 hrs. @ 70 degrees F
Traffic Serviceable: 14-24 hrs. @ 70 degrees F
Approx.
Coverage: 114-160 gal. @ 10-14 mils wet
Primer: Required (Consult your QuestMark Representative)
Epoxy Skidproofer 5210
A two component plus aggregate, colored, high solids epoxy coating providing a chemical resistant non-slip surface that can stand up to medium-duty
industrial traffic.
Colors: Light Gray, Medium Gray, Dark Gray, Red and special colors available upon request
Packaging: 3 gal. kit (available in a medium or course non-slip texture)
Pot Life: 1-2 hrs. @ 70 degrees F
Recoat
Time: 5-8 hrs. @ 70 degrees F
Cure
Time (Light Foot Traffic): 110-12 hrs. @ 70 degrees F
Traffic Serviceable: 14-24 hrs. @ 70 degrees F
Approx.
Coverage: 89-114 sq. ft. per gal. @ 14-18 mils wet
Primer: Required (Consult your QuestMark Representative)
|
