Plastic Mortar - Products & Maintenance
Premium Formulation Resurfacer 2110
A three component, 100% solids epoxy mortar and is a resin-rich formula offering the highest compressive and flexible strength of our mortars. Absolute best for resisting high impact and heavy abrasion; stands up to heavy traffic from steel wheels and fork lifts; ideal for loading docks, traffic aisles and machining areas.
Colors: Light Gray, Dark Gray, Red, Black, Natural and special colors available upon request.
Packaging: 2 gal. and 5 gal. units
Pot Life: 30-40 mins. @ 70 degrees F
Traffic Serviceable: 6-10 hrs. @ 70 degrees F
Low Temperature Epoxy Patch 2124
A three component, 100% solids epoxy mortar designed for repair and patching applications in cold storage, freezers or cold temperature areas where most epoxies will not cure. Best for use in working temperatures are 30-35 degrees Fahrenheit. Can also be used as a quick patch in areas with ambient temperatures.
Colors: Natural and special colors available upon request.
Packaging: 2 gal. and 5 gal. units
Pot Life: 10-15 mins. @ 70 degrees F
Traffic Serviceable: 2-4 hrs. @ 70 degrees F
Standard Epoxy Patch 2105
A three component, 100% solid epoxy mortar and is the most economical of our plastic mortars. It is formulated to incorporate good flexural, tensile and compressive strength. 2105 is recommended for patching and resurfacing of areas where chemical resistance and a high degree of impact resistance are not required.
Colors: Light Gray, Dark Gray, Red, Black, Natural and special colors available upon request.
Packaging: 2 gal. and 5 gal. units
Pot Life: 20-30 mins. @ 70 degrees F
Traffic Serviceable: 6-10 hrs. @ 70 degrees F
Coal Tar Epoxy Patch 2130
Is a three component, 100% solids, coal tar epoxy mortar designed for patching indoor or outdoor asphalt areas. Formulated in black only, does not require a primer and has excellent weatherability and impact resistance.
Colors: Black only
Packaging: 2 gal. and 5 gal. units
Pot Life: 20-30 mins. @ 70 degrees F F
Traffic Serviceable: 4-10 hrs. @ 70 degrees F
Food Formulation Epoxy Patch 2123
A three component, 100% solids epoxy mortar designed for patching and resurfacing in federally inspected meat and poultry plants. Recommended for cold floors that are subject to repeated washings with hot water. Excellent tensile strength and good chemical and abrasion resistance.
Colors: Light Gray, Dark Gray, Red, Black, Natural and special colors available upon request..
Packaging: 2 gal. and 5 gal. units
Pot Life: 20-30 mins. @ 70 degrees F
Traffic Serviceable: 6-10 hrs. @ 70 degrees F
Moisture Insensitive Epoxy Patch 2600
Is a three component, 100% solids epoxy mortar designed for applications with water sources with continual access to the repair area. Will cure underwater at temperatures as low as 35 degrees Fahrenheit. Recommended for service areas where water exposure and damp concrete exist.
Colors: Natural (unpigmented) and special colors available upon request.
Packaging: 2 gal. and 5 gal. units
Pot Life:10-20 mins. @ 70 degrees F
Traffic Serviceable: 8-12 hrs. @ 70 degrees
Quick Setting Epoxy Patch 2125
A three component, 100% solids epoxy mortar designed for applications with temperatures below freezing or a rapid patch is necessary. Recommended for cold storage areas, freezers, walkways and support bases for tanks and heavy traffic areas. Can also be used as a quick patch in areas with ambient temperatures.
Colors: Light Gray, Dark Gray, Reds, Black, Natural and special colors available upon request.
Packaging: 2 gal. and 5 gal. units
Pot Life: 8-15 mins. @ 70 degrees F
Traffic Serviceable: 2-4 hrs. @ 70 degrees F
Sub-Zero Epoxy Patch 2128
A three component, 100% solids epoxy mortar designed for applications with temperatures as low as minus 10 degrees Fahrenheit. Recommended for cold storage areas, freezers or general outdoor patching in the winter. Can also be used as a quick patch in areas with ambient temperatures.
Colors: Natural (unpigmented)
Packaging: 2 gal. unit
Pot Life: 2-4 mins. @ 70 degrees F
Traffic Serviceable: 30-60 mins. @ 70 degrees F
Vertical Epoxy Patch 2698
A three component, 100% solids epoxy mortar designed for applications on vertical surfaces. Suitable for thin coat applications and patch or repair work. Long pot life provides working times in excess of two hours when blended with the provided aggregate. Recommended for walls and curb patching or forming.
Colors: Light Gray, Dark Gray, Tile Red, Black and Natural
Packaging: 2 gal. and 5 gal. units
Pot Life: 2-3 hrs. @ 70 degrees F
Traffic Serviceable: 14-24 hrs. @ 70 degrees F