Epoxy - Products & Maintenance
Flexible Broadcast Primer 1139
A two component 100% solids, flexible epoxy with 60% elongation designed for sealing traffic surfaces exposed to vehicular or foot traffic.
Colors:Clear
Packaging:2 gal. & 10 gal. kits
Pot Life:15-25 mins. @ 70 degrees F
Cure Time (Light Foot Traffic): 12-24 hrs. @ 70 degrees
Recoat Time: 8-12 hrs. @ 70 degrees F
Primer: None required
Flexible Epoxy Primer 1140
A two component 100% solids, flexible epoxy with 90% elongation designed for sealing traffic surfaces exposed to vehicular or foot traffic.
Colors: Semi-clear
Packaging: 2 gal. & 10 gal. kits
Pot Life: 20-30 mins. @ 70 degrees F
Cure Time (Light Foot Traffic): 12-24 hrs. @ 70 degrees F
Recoat Time: 8-12 hrs. @ 70 degrees F
Primer: None required
High Build Epoxy Coating 3707
A two component, 100% solids pigmented, epoxy coating designed for floors that are too rough for thin mil coatings. Optional use as a base coat or a topcoat and is suitable in some chemical exposure environments.
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Beige, Tile Red, Tan, Light Blue, Blue, Brown, and special colors available upon request.
Packaging:1.5 gal. and 3 gal. kits
Pot Life: 30-50 mins. @ 70 degrees F
Recoat Time: 8-12 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic):12-24 hrs. @ 70 degrees F
Approx. Coverage: 53-130 sq. ft. per gal. @ 12-30 mils wet
Primer: Required (Consult your QuestMark Representative)
High Build Fast Cure Epoxy 3380& 3183
Two component, 97% solids epoxy coatings designed for high build quick-setting impact-resistantance. Fast rate of property development; will achieve full chemical resistance capabilities in three days at normal room temperatures; good low temperature cure capabilities, as low as 45 degrees F.
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Tile Red, Brown, Tan, Beige, Blue, and special colors are available upon request.
Packaging: 1.5 gal. and 3 gal. kits
Pot Life: 8-15 mins. @ 70 degrees F
Recoat Time:6-8 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic):6-12 hrs. @ 70 degrees F
Primer:Required (Consult your QuestMark Representative)
High Build Fast Cure Epoxy 3181
A two component 100% solids, colored epoxy coating designed for high build impact. Good low temperature cure capabilities, as low as 45 degrees F.
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Tile Red, Brown, Tan, Beige, Blue, Green and special colors are available upon request.
Packaging: 1.5 gal. and 3 gal. kits
Pot Life: 16-26 mins. @ 70 degrees F
Recoat Time: 6-8 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 6-12 hours @ 70 degrees F
Primer: Required (Consult your QuestMark Representative)
High Build Urethane Coating 1701 & 2701 Urethane Mortar
High Build Urethane Coating is a two component, 100% solid clear aliphatic urethane coating. 2701 Urethane Mortar is a three component urethane mortar designed for strength and flexibility. Recommended for industrial applications over concrete where flexibility and UV stability are required. Not Recommended For: Immersion applications for acids and chemicals.
Colors:
1701 Coating: Clear only
2701 Mortar: Light Gray, Dark Gray, Black, Red and Natural
Packaging:
1701 Coating: 2 gal. and 10 gal. kits
2701 Mortar: 1/4 unit and 1/2 unit
Pot Life: 80-105 mins. @ 70 degrees
Recoat Time: 5-8 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 10-16 hrs. @ 70 degrees F
Approx. Coverage:
1701 Coating: 80-160 sq. ft. per gal. @ 10-20 mils
2701 Mortar (unit): Approx. 24 sq. ft. @ 1/4 inch and 48 sq. ft. @ 1/8 inch
Primer:
1701 Coating: Required
2701 Mortar: Optional
High Performance Epoxy Coating 1144
A two component, solvent-based epoxy coating. Excellent characteristics for abrasion; chemical resistance; substrate penetration; may be used as a primer for high build coatings and urethanes or as a stand-alone coating over varying substrates.
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Beige, Tile Red, Brown, Tan, Light Blue and special colors available upon request.
Packaging: 2 gal. and 10 gal. kits
Pot Life: 3-6 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 16-24 hrs. @ 70 degrees F
Recoat Time:4-6 hrs. @ 70 degrees F
Primer:Required (Consult your QuestMark Representative)
High Performance Urethane 1320 & 1321
Two component, polyester/aliphatic polyurethane floor coatings. Excellent characteristics for abrasion resistance; chemical resistance; flexibility;, weathering; UV stability. Recommended for warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, indoor/outdoor service and some chemical exposure areas. (1320 Semi Gloss/1321 High Gloss)
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Beige, Tile Red, Brown, Tan, Blue, Light Blue, Clear and special colors available upon request.
Packaging: 1.5 gal. and 3 gal. kits
Pot Life: 3-5 hrs. @ 70 degrees F
Recoat Time: 4-8 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic):14-24 hrs. @ 70 degrees F
Approx. Coverage: 320-500 sq. ft. per gal. @ 5-6 mils wet
Primer: Required (Consult your QuestMark Representative)
Low Viscosity Epoxy Coating 3100LV
A two component, 97% solids low viscosity epoxy coating designed for medium build coating. Excellent mar and abrasion resistance - no topcoat needed.
Colors: Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Beige, Tile Red, Tan, Light Blue, Black and special colors available upon request.
Packaging: 1.5 gal. and 3 gal. kits
Pot Life: 15-25 mins. @ 70 degrees F
Recoat Time:12-16 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 16-24 hrs. @ 70 degrees F
Approx. Coverage: 125-259 sq. ft. per gal. @ 6-12 mils wet
Primer:Required (Consult your QuestMark Representative)
Moisture Tolerant Epoxy Coating 3137M
A two component, moisture tolerant, 100% solids, high build epoxy that can be used as a clear coating or as a receiver coat for paint chips, marbled chips or colored sand mixtures to provide a wide variety of color patterns. Recommended for laboratories, product display areas, warehouses, kitchens, restrooms or other areas where a clear high build or decorative floor is needed.
Colors: Clear only
Packaging: 1.5 gal. and 3 gal. kits
Pot Life: 20-30 mins. @ 70 degrees F
Recoat Time:10-16 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 14-18 hrs. @ 70 degrees F
Approx. Coverage: 88-99 sq. ft. per gal. @ 16-18 mils wet
Primer: Required Consult your QuestMark Representative)
Moisture Cured Urethane 1357
A single component, moisture-cured, HDI-based, polyurethane floor coating that exhibits superior characteristics for abrasion and chemical/stain resistance and excellent flexibility. Recommended for showrooms, service centers, warehouses, computer rooms, laboratories, cafeterias and some indoor chemical exposure areas.
Colors: Clear Only
Packaging: 2 gal., 5 gal. and 55 gal. kits
Pot Life: 3-5 hrs. @ 70 degrees F
Recoat Time: 8-12 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 12-24 hrs. @ 70 degrees F
Approx. Coverage: 400-800 sq. ft. per gal. @ 2-4 mils wet
Primer: Required (Consult your QuestMark Representative)
Polyaspartic High Build Coating 3340
A two component, 100% solids polyaspartic urethane formulated for minimum downtime and extremely fast cure rates. Excellent chemical and abrasion resistance; UV light stable; virtually odorless; can be used as a receiver coat for paint chips, marble chips or colored sand mixtures to provide a variety of decorative options. Caution: the rapid cure of this product makes it extremely difficult to work with.
Colors: Clear only
Packaging: 2 gal. kit
Pot Life: 18-28 mins. @ 70 degrees F
Recoat Time: 1-2 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 1-3 hrs. @ 70 degrees F
Approx. Coverage: 25 sq. ft. per gal. @ 62.5 mils wet
Primer: Required Consult your QuestMark Representative)
Textured High Build Epoxy Coating 3095
A two component, 100% solids epoxy. Seals and hides imperfections; provides a durable textured wear surface; has outstanding wear and chemical resistance. Recommended for topcoating epoxy mortar systems, as well as for providing textured coats over concrete or other coatings
Colors: White, Off White, Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Beige, Tile Red, Brown, Tan, Light Blue, Clear and special colors available upon request.
Packaging: 1.5 gal. and 3 gal. kits
Pot Life: 12-23 mins. @ 70 degrees F
Recoat Time: 8-12 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 12-18 hrs. @ 70 degrees F
Approx.Coverage: 200 sq. ft. per gal. @ 8 mils wet
Primer: Required(Consult your QuestMark Representative)
Vertical Epoxy Coating 1015V
A two component, water-based epoxy coating designed for vertical applications up to eight mils thick per coat without sagging. Attractive; durable; low odor; VOC compliant.
Colors: Off White, Light Gray, Medium Gray, Dark Gray, Tile Red, Tan and special colors available upon request.
Packaging: 2 gal. and 5 gal. kits
Pot Life: 1-1.5 hrs. @ 70 degrees F
Tack Free (Dry to Touch): 5-8 hrs. @ 70 degrees F
Recoat Time: 7-10 hrs. @ 70 degrees F
Approx. Coverage: 250 sq. ft. per gal.@ 5-7 mils wet
Primer: None required
Water-based Epoxy Coating 1015
A two component, water-based epoxy coating that exhibits excellent characteristics that rival solvent based epoxies. Superb chemical and abrasion resistance.
Colors: White, Light Gray, Medium Gray, Dark Gray, Charcoal Gray, Tile Red, Brown, Tan, Light Blue, Amber, Clear and special colors available upon request.
Packaging: 2 gal. and 5 gal. kits
Pot Life: 1-1.5 hrs. @ 70 degrees F
Recoat Time: 7-10 hrs. @ 70 degrees F
Cure Time (Light Foot Traffic): 16-24 hrs. @ 70 degrees F
Approx. Coverage: 250 sq. ft. per gal. @ 5-7 mils wet
Primer: None required